Cyclades AlterPath ACS Command Reference Manual Download Page 242

Page: 242 / 420

Page 242

226

Power Management with AlterPath™ PM Integration

2. Issuing the

pmCommand

Use: pmCommand <serial port number> <command> <arguments>

where,

<serial port number> is the serial port number configured as IPDU
<command> <arguments> are the PM command and its arguments.

See the list of commands in Table 6.2.

Using the Power Management Utility

You can use the Power Management Utility to control IPDUs and individual outlets.

Manage Devices Plugged into a Single Outlet

Selecting option “2” for “Individual IPDUs” from the PM menu invokes the following
prompt:

Give serial port number:

Summary of Contents for AlterPath ACS





































































































































































































































































































































































































































Search results

Summary of Contents for AlterPath ACS

Reviews:

Brands by name

Popular brands

Cyclades AlterPath ACS, Command Reference Manual

Search results

Summary of Contents for AlterPath ACS

Reviews:

Brands by name

Popular brands