Cyclades AlterPath ACS, Command Reference Manual

Page: 34 / 420

18
Basic Network Configuration
Set to defaults? (y/n) [n]:
Step 2 - At the prompt, enter n to change the defaults.
Step 3 - Press Enter to accept the default hostname, otherwise enter your own
hostname.
Step 4 - Press Enter to keep DHCP enabled, or enter “n” to specify a static IP
address for ACS.
By default, ACS uses the IP address provided by the DHCP server. If your network does
not use DHCP, then ACS will default to 192.168.160.10.
Step 5 - Change the default static IP address, see your network administrator
to obtain a valid IP address.
**********************************************
*****C O N F I G U R A T I O N W I Z A R D**
**********************************************
Current configuration:
Hostname: CAS
DHCP: disabled
System IP: 192.168.48.11
Domain name: cyclades.com
Primary DNS Server: 192.168.44.21
Second DNS Server: #
Gateway IP: 192.168.48.1
Network Mask: 255.255.252.0
Set to defaults? (y/n) [n]:
Set to defaults (y/n)[n]: n
Hostname [CAS]: fremont_branch_ACS
Do you want to use DHCP to automatically assign an IP for your
system? (y/n) [n] :
System IP[192.168.160.10]: ACS_IP_address