Cyclades AlterPath ACS, Command Reference Manual

Page: 277 / 420

AlterPath ACS Command Reference Guide
261
PCMCIA Cards Integration
* - - /bin/login @
Do this before the above presented line:
<pseudo callback name>- - /sbin/callback -S <phone number of the client>
eg.:
call - - /sbin/callback -S 12345
Where, 'call' is the pseudo callback name and '123456' is the number to dial back.
NOTE:
1. The order of configuration in /etc/mgetty/login.config matters. By default, it has the line
* - - /bin/login @ at the end of the file. This line allows any users to log in and be
verified by the login program. If you were to add the callback line after this line, the callback
program will not be initiated when you try logging in. Instead, the login program will be used
to verify you since it was encountered first. List the callback users first if you want the option
of having some users access the callback program and the others the login program.
call - - /sbin/callback -S 12345
call2 - - /sbin/callback -S 77777
* - - /bin/login @
The example above will allow you to have the option whether or not you want to use the
callback functionality. If you log in with call or call2, then callback starts immediately. If you
log in as anybody else other than call or call2, callback will not start and you'll be verified
by the login program.
2. Don't use * instead of some callback user name. Mgetty will fall to infinite callback.
3. If you don't specify a telephone number, callback will ask for a number after you log in as
the pseudo callback user.
Step 3 - If you plan to login through PPP with PAP authentication create pap
user name in
/etc/ppp/pap-secrets .
Add a line similar to the following: (include the quotes and the two asterisks).
"myUserName" * "myUserNamePassword"*
Step 4 - If you plan to login through PPP follow steps 4 - 9 in the section above
on Modem PC Cards.
Step 5 - Create users.
Step A: Create a new user with the command adduser myUserName.