manualshive.com logo in svg

Cyclades AlterPath ACS, Command Reference Manual

Share
Download
Page 50
Cyclades AlterPath ACS Command Reference Manual Download Page 50

34

Device Access

2.3 Menu Shell

This application allows you to customize the menu presented to users when they connect 
to the ACS from a dumb terminal. The menu can be set up to allow users to connect to 
different servers; thereby, making it quick and easy for users to connect to the those 
servers on the LAN.

How to use

Once the appropriate configurations are done the user will connect to the ACS using a 
serial terminal. The user will then automatically receive a menu similar to that shown 
below: 

The user selects the option required to connect to the desired server or to exit the system.

How to configure

Basically the configuration for this feature is divided in two parts that are going to be 
described in this section.
Firstly it is necessary to assign which users are going to use the Menu Shell by using the 
proper options provided by the 

menush_cfg

 utility. The second part is 

Welcome!

1) Sun server

2) Dell server

3) Linux server

4) Quit

Option ==> 

Summary of Contents for AlterPath ACS





































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands