Cyclades AlterPath ACS, Command Reference Manual

Page: 353 / 420

AlterPath ACS Command Reference Guide
337
Additional Features and Applications
Controls the front panel identify light. Default is 15. Use
0 to turn off.
1.4 restart_cause
Queries the chassis for the cause of the last system restart
1.5 policy
Sets the chassis power policy in the event power failure
1.5.1 list – Return supported policies
1.5.2 always-on – Turn on when power is restored
1.5.3 previous – Return to previous state when power is
restored
1.5.4 always-off – Stay off after power is restored
1.6 power
Performs a chassis control command to view and change
the power state
1.6.1 status – Show current chassis power status
1.6.2 on – Power up chassis
1.6.3 off – Power down chassis into soft off
1.6.4 cycle – Provide power off interval of at least 1
second
1.6.5 reset – Perform a hard reset
1.7 sensor
1.7.1 list – Lists sensors and thresholds in a wide table
format
IPMI [CLI]
You can configure IPMI using the ipmi keyword and the following attributes in CLI
mode:
1.0 config – enter into configuration state
1.1 ipmi – configure IPMI devices
1.1.1 add <alias> – add a IPMI device serverIP
serverIP <n.n.n.n> – IP address of the device