Cyclades AlterPath ACS, Command Reference Manual

Page: 153 / 420

AlterPath ACS Command Reference Guide
137
Network
Setup on the ACS
Adding Road Warrior support so people can connect remotely to your Console Server is
straightforward. Just create the file
/etc/warrior.connection and add the following lines
to this file:
IMPORTANT! The connection name line: "conn gate-xy" must start on the FIRST column of
the line. All other lines after that line must be indented by 1 TAB. This is MANDATORY.
conn gate-by
left=1.2.3.4
leftid=@acs.example.com
leftrsasigkey=0s1LgR7/oUM...
# allow connection attempt from any address
# attempt fails if caller cannot authenticate
right-angle
# authentication information
rightid=@xy.example.com
rightrsasigkey=0s1LgR7/oUM...
# Add this connection to the database when IPsec starts
autoload
File Description 4.2: ACS ipsec.conf file