![Cyclades AlterPath ACS Command Reference Manual Download Page 343](http://html.mh-extra.comalterpath-acs_command-reference-manual_2703907343.png)
AlterPath ACS Command Reference Guide
327
Additional Features and Applications
<guid>
Is a hexadecimal GUID that identifies a specific instance of a
channel. During a life-span of a Windows Server (between any
two system boots), there is a total of 10 channels being allocated.
Of those, one can be expected a GUID for each of the following
channel types:
1) GUI-Mode Setup Debug Log
2) GUI-Mode Setup Error Log
3) GUI-Mode Setup Action Log
4) SAC
The remaining GUIDs are of the CMD channel type. For example,
during Windows setup, there are 3 GUIDs assigned to Setup, 1 to
SAC and the remaining 6 to CMD. However, during normal
Windows operations, there is 1 GUID assigned to SAC and the
remaining 9 to CMD.
These GUIDs are created a new for each instance of channels, and
should not be confused with the constant GUIDs provided via the
<application-type> tag above.
<name>
Is the system name of the active channel. For the GUI-mode
Setup tool, they are the file names where the data is written:
1) Debug Log (setuplog.txt)
2) Error Log (setuperr.log)
3) Action Log (setupact.log)
For Windows Server, they are:
1) SAC (SAC)
2) CMD (Cmdnnnn), where nnnn indicates the
corresponding channel number
<type>
Is the type of data being emitted on the active channel. Currently,
there are two types of data supported:
1) Raw for the 3 GUI-Mode Setup channels
2) VT-UTF8 for the SAC and CMD channels
Element
Description
Table 9.2: Elements in the <channel-switch> tag
Summary of Contents for AlterPath ACS
