manualshive.com logo in svg

Cyclades AlterPath ACS, Command Reference Manual

Share
Download
Page 115
Cyclades AlterPath ACS Command Reference Manual Download Page 115

..........................................................................

 Chapter 4

Chapter 4 - Network

 Network

4.1 Introduction

This chapter will show important configuration settings regarding the network 
configuration or any feature related to it. The contents of this chapter is briefly presented 
below:

•

Basic Network Settings

•

DHCP Client

•

Routes and Default Gateway

•

DNS Server and Domain Name

•

Bonding

•

Hosts

•

TCP Keepalive

•

Filters and Network Address Translation

•

VPN Configuration

4.2 Basic Network Settings

This section will show how to configure basic network parameters. This includes 
configuration of ip addresses, netmasks and hostname.

Hostname

The most basic network related configuration is setting up a hostname. In the ACS this 
can be done editing the 

/etc/hostname

 file.

VI mode

The related file to this configuration is the 

/etc/hostname

. To change the hostname, edit 

it and set the desired hostname. 

[root@CAS etc]# vi /etc/hostname

CAS

File Description 4.1: /etc/hostname

Summary of Contents for AlterPath ACS





































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands