manualshive.com logo in svg

Cyclades AlterPath ACS, Command Reference Manual

The Cyclades AlterPath ACS Command Reference Manual is your comprehensive guide to mastering the features of this advanced network access and control system. Available for free download at manualshive.com, this manual equips users with the necessary knowledge to maximize the functionality of their device.

Share
Download
Page 309
background image

 AlterPath ACS Command Reference Guide

293 

Profile Configuration

all.pmtype

Name of the IPDU manufacturer.

Note: 

This parameter is inactive by default. To activate, 

uncomment the parameter and set the desired value.

null

all.pmusers

List of the outlets each user can access.

Note: 

This parameter is inactive by default. To activate, 

uncomment the parameter and set the desired value.

null

all.pmkey

The hotkey that identifies the power management 
command.

Note: 

This parameter is inactive by default. To activate, 

uncomment the parameter and set the desired value.

off

all.sttyCmd 

The TTY is programmed to work as configured and 
this user-specific configuration is applied over that 
serial port. Parameters must be separated by a space. 
The following example sets :

-igncr 

This tells the terminal not to ignore the carriage-return 
on input, 

-onlcr 

Do not map newline character to a carriage return or 
newline character sequence on output, 

opost 

Post-process output, 

-icrnl 

Do not map carriage-return to a newline character on 
input. 

all.sttyCmd -igncr -onlcr opost -icrnl

Note: 

This parameter is inactive by default. To activate, 

uncomment the parameter and set the desired value.

null

Parameter

Description

Factory Configuration

Table 8.1: /etc/portslave/pslave.conf common parameters

Summary of Contents for AlterPath ACS





































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AlterPath ACS

8e6 Technologies Enterprise Filter Authentication R3000 Quick Start Manual preview
Enterprise Filter Authentication R3000
Brand: 8e6 Technologies Pages: 66
Cambium Networks PTP 820 Series Manual preview
PTP 820 Series
Brand: Cambium Networks Pages: 29
Nayar Systems GSR Manual preview
GSR
Brand: Nayar Systems Pages: 37
Avid Technology MediaStream ConnectPlus 1000 Installation And Operation Manual preview
MediaStream ConnectPlus 1000
Brand: Avid Technology Pages: 74
NETGEAR RP334 Installation Manual preview
RP334
Brand: NETGEAR Pages: 2
Planet GSW-1602SF User Manual preview
GSW-1602SF
Brand: Planet Pages: 20
Patton electronics 6103 User Manual preview
6103
Brand: Patton electronics Pages: 12
Cromemco 32K Bytesaver Instruction Manual preview
32K Bytesaver
Brand: Cromemco Pages: 46
Verizon Wireless PC 3220 Owner'S Manual preview
PC 3220
Brand: Verizon Wireless Pages: 39
A4Tech RG-71M User Manual preview
RG-71M
Brand: A4Tech Pages: 7
Gemtek Systems WLTFQR-121 User Manual preview
WLTFQR-121
Brand: Gemtek Systems Pages: 51
Kontron CPS3003-SA User Manual preview
CPS3003-SA
Brand: Kontron Pages: 19
RubyTech VS-820S User Manual preview
VS-820S
Brand: RubyTech Pages: 25
Aleratec 260206 Quick Start Manual preview
260206
Brand: Aleratec Pages: 16
LevelOne NVR-0432 User Manual preview
NVR-0432
Brand: LevelOne Pages: 142
ORiNG IES-3082GC User Manual preview
IES-3082GC
Brand: ORiNG Pages: 101
Alphacool EISBAER PRO Quick Start Manual preview
EISBAER PRO
Brand: Alphacool Pages: 9
Supermicro BPN-SAS3-LB16A-N10 User Manual preview
BPN-SAS3-LB16A-N10
Brand: Supermicro Pages: 11

Brands by name

Popular brands

Load more brands