Cyclades AlterPath ACS, Command Reference Manual

Page: 318 / 420

302
Profile Configuration
all.auto_answer_output This parameter works in conjunction with
all.auto_answer_input . It allows you to configure a
string that is sent back to the remote server whenever
the incoming data remote server matches with
all.auto_answer_input . This parameter works only
when there is no session to the port. If this parameter is
commented, then nothing will be sent back to the
remote server even if
all.auto_answer_input is
uncommented. If this parameter is uncommented and
if
all.auto_answer_input is also uncommented, then
the string configured will be sent back to the remote
server.
Note: This parameter is inactive by default. To
activate, uncomment the parameter and set the desired
value.
null
all.poll_interval Valid only for protocols socket_server and raw_data .
When not set to zero, this parameter sets the wait for a
TCP connection keep-alive timer. If no traffic passes
through the ACS for this period of time, the ACS will
send a line status message to the remote device to see
if the connection is still up. If not configured, 1000 ms
is assumed (the unit for this parameter is ms). If set to
zero, line status messages will not be sent to the socket
client.
Note: This parameter is inactive by default. To
activate, uncomment the parameter and set the desired
value.
1000
Parameter Description Factory Configuration
Table 8.2: CAS specific parameters for the pslave.conf