_______________________________________________________________
CXR Larus 80-100-400 Issue 2, July 2006 2-13
.25 T1
References
1. AT&T Tech Pub 60110, 1983, Digital Synchronization Network Plan.
2. Bellcore TA-NPL-000436, Issue 2, 1993.
3.
-000378, 1986, Timing Signal Generator Requirements
and Objectives.
4.
1-1994, Synchronization Interface Standards for Digital
Networks.
5.
-000253, 1991, SONET Transport Systems: Common
Generic Criteria.
6.
-NWT-002224, 1992, SONET Synchronization Planning
Guidelines.
7.
y 1995, Clocks for the Synchronized Network:
Common Generic Criteria.
8.
RE, Issue 1, 1995, Generic Requirements for Timing
Signal Generators.
.26 E1
References
1.
4, and ITU-T G.810. Considerations on timing and
synchronization issues.
2.
clocks suitable for plesiochronous operation of international digital links.
3.
clocks suitable
for plesiochronous operation of international digital links.
4.
al networks which are
based on the synchronous digital hierarchy (SDH).
5.
Terminal Equipment (DTE) and Data Circuit-Terminating Equipment (DCE).
6.
ket mode and
connected to Public Data Networks by dedicated circuit.
2
Bellcore TA-TSY
ANSI/T1.10
Bellcore TR-NWT
Bellcore SR
Bellcore GR-1244-CORE, Ma
Bellcore GR-378-CO
2
ITU-T G.703, ITU-T G.70
ITU-T G.811. Timing requirements at the outputs of primary reference
ITU-T G.812. Timing requirements at the outputs of share
ITU-T G.825. Telecommunication standardization sector of ITU digital
networks. The control of jitter and wander within digit
ITU-T V.24. List of definitions for interchange circuits between Data
ITU-T X.25. International Telecommunication Union Telecommunication
Standardization Sector of ITU Public Data Networks, Interfaces, Interface
between Data Terminal Equipment (DTE) and Data Circuit-Terminating
Equipment (DCE) for terminals operating in the pac
