17
Expert-32T rev.03
Expert-32T
19. Day/Night Set Points
: Press the
Edit key to enable or disable separate
day and night set points.
20. Clean Mode in room 1
: Press the
Edit key and set to yes to activate
clean mode in room 1.
21. Clean Mode in room 2
: Press the
Edit key and set to yes to activate
clean mode in room 2.
22. Change Password
: The user can define a password to restrict
access to the functions contained in the SETUP section (USER, OUTPUTS
and TEST). The password must be entered each time one of these
functions is selected. When the correct password is entered, it does not
need to be re-entered until the display times out (i.e. after 15 minutes of
inactivity). The password is a sequence of three numbers from 0 to 99.
By default, the password is set to 0 0 0.
The new password must be
entered, one number at a time.
Use the arrow keys to enter the
first number. Press the Edit key to
step to the next number. Use the
arrow keys to enter the second
number, etc.
21. Program Version Number
: The
program version number of the con-
troller is displayed.
Clean Mode in
Room1? NO
Clean Mode in
Room2? NO
Use Night
settings? NO
Expert 32T
X.X
New password?
0 ** **
Summary of Contents for Expert-32T
Page 1: ...Expert 32T Temperature Controller USER S MANUAL T...
Page 2: ......
Page 75: ......
Page 76: ...M 890 00074 rev 03 REV 01...
