Cumberland Expert-32T, User Manual

Page: 18 / 76

18
Expert-32T rev.03
Expert-32T
Relays 1-8
12345678
Relays 9-16
90123456
Relays 17-24
78901234
RELAY ASSIGNMENTS
The user can now configure each output separately by selecting the
output using the output select buttons and adjusting the parameters
displayed. Configuration parameters vary according to the type of
output.
Use the up- and down-arrow keys to step through all the display screens
for a given output. The last display screen for all outputs is the relay
assignment.
Relay Assignments : The Expert-32T
can control up to 32 output relays.
The relay panel contains 32 relay
outputs. The mapping between the
stages and the relays must be deter-
mined by the user. The relays are
displayed in groups of 8 relays at a
time. The relays assigned to an output
correspond to the flashing numbers on
the display. Press the Edit key to
display each relay state and use the
arrow keys to assign (ON) or deassign
(OFF) the relay. Use the down-arrow
key to step to the next bank of relays
(see example on following pages). Use
the template at the end of this manual
to map the relays before assigning
them from the front panel.
Relays 25-32
56789012