31
Expert-32T rev.03
Expert-32T
ON 1:30min
Cycle 5:00min
1
Adjusting Timer Settings
The on time ranges from 0 to 99 minutes, 59 seconds and cannot be
greater than the cycle time. The cycle time ranges from 0 to 99 min-
utes, 59 seconds. A separate on time can be defined for night-time.
Set the function to
MINIMUM
VENTILATION / CURVE
using the
menu select buttons. The current
on time and cycle time are
displayed. Note that the ON time
can only be modified if the curve is
turned off.
If the curve is ON, press the down-arrow key once then press the
Edit key. The on/off state of the curve flashes on the display. Use
the arrow keys to turn the curve off. Press the Edit to validate the
curve state and return back to the previous menu by pressing the up-
arrow key.
Press the Edit key. The on time value flashes on the display. Use the
arrow keys to set the on time.
Press the Edit key. The cycle value flashes on the display. Use the
arrow keys to set the cycle time.
Press the down-arrow key. The
night-time on time value is dis-
played.
Press the Edit key. The night-time on time value flashes on the
display. Use the arrow keys to set the night-time on time.
NOTE
: The On Time and Cycle Time are limited by the fan start/stop
delay if the vent doors are used.
Night
on time 1:30min
Summary of Contents for Expert-32T
Page 1: ...Expert 32T Temperature Controller USER S MANUAL T...
Page 2: ......
Page 75: ......
Page 76: ...M 890 00074 rev 03 REV 01...
