Cumberland Expert-32T, User Manual

Page: 15 / 76

15
Expert-32T rev.03
Expert-32T
5. Probe Set 1 - Probes Used : The
selected probes for probe set 1 flash on
the display. Press the Edit key and use
the arrow keys to select or deselect
each probe individually for set 1.
6. Probe Set 2 - Probes Used : The
selected probes for probe set 2 flash on
the display. Press the Edit key and use
the arrow keys to select or deselect
each probe individually for set 2.
7. Use Water Meter : Press the Edit
key and set to YES if a water meter is
connected to the unit.
8. Use Outside Temperature Probe :
Press the Edit key and set to YES if an
outside temperature sensor is con-
nected to the unit.
9. Use Static Pressure Sensor : Press
the Edit key and set to YES if a static
pressure sensor is connected to the
unit.
10. Temperature Units : Press the Edit
key and choose between Fahrenheit
and Celsius degrees for displaying
temperature values. This parameter is
commun to both rooms.
11. Water Meter Units
: Press the Edit
key and choose between gallons and
litres for displaying water consumption.
This parameter is commun to both
rooms.
12. Water Meter Calibration : Press the
Edit key and adjust the number of
gallons or liters per water meter pulse.
Set 2 Probes
1234
Use water
meter? NO
Use Out T°
sensor? NO
Use Static P
sensor? NO
Temperature
units: °F
Water meter
units: gal
Water meter
unit/pulse 1
Set 1 Probes
1234