152
Click
Start
for the Residential Gateway to emit ICMP packets to the destination IP
address. And the ICMP replies from the destination host or any other ICMP messages
will be displayed in this section.
3.11.5.2 Traceroute
Traceroute is used to trach the path between the local host and the remote host. Enter the
traceroute
command in User mode. In this command, you can add an optional max hops value
for the number of hops that packets are sent and received.
IP/URL Address
—
Specify target IP address or URL.
3.11.6 User Privilege
This page enables the network administrator to modify the user account settings of the Residential
Gateway. Select
User Privilege
from
Administration
sub menu bar. Then,
User Privilege
screen
page will appear as follows:
