CTS FWR5-3105 Series User Manual Download Page 73

Page: 73 / 179

VLAN

－

This is the VLAN ID which this WAN interface will add to the egress untagged

packets.

P-Bit

－

This is the 802.1p priority value which this WAN interface will add to the egress

untagged packet together with its VLAN ID.

－

This is the IP address of this WAN interface.

Netmask

－

This is the subnet mask of this WAN interface.

Action

－

Click

edit

to change the settings of an interface in the following section. Or

click

delete

if you want to remove this entry from the interface list.

To create a new interface, click

Add new network interface

below the list and edit the

settings of the new interface in the following section.

This section enables you to edit the settings of a new WAN interface or a WAN interface in the

interface list above. And below is the description of configuration parameters in this section.

WAN Enable

－

Enable or disable this WAN interface.

WAN Information

－

Select a WAN information type from the pull-down menu. You can

refer to the following table for a description for the types of the WAN interfaces.

Management

－

The Management Interface enables the network administrator to

remotely log in the Residential Gateway via the Management Interface’s IP

Summary of Contents for FWR5-3105 Series




















































































































































































Search results

Summary of Contents for FWR5-3105 Series

Reviews:

Related manuals for FWR5-3105 Series

Brands by name

Popular brands

CTS FWR5-3105 Series, User Manual

Search results

Summary of Contents for FWR5-3105 Series

Reviews:

Related manuals for FWR5-3105 Series

Brands by name

Popular brands