34
Gateway(config-wlan1-ssid-
No.-mac-filter-rule-No.)# no
mac-address
[aa:bb:cc:dd:ee:ff]
Clear MAC filter address.
Show Command
Gateway(config-wlan1-ssid-
No.)# show
Shows the current status of the SSID.
Gateway(config-wlan1-ssid-
No.-mac-filter-rule-No.)#
show
Display the SSID’s current status of MAC filter
configuration.
For Bandwidth 2.4G:
Command
Parameter
Description
Gateway(config)# interface
wlan2
Access WiFi bandwidth 2.4G settings.
Gateway(config)# interface
wlan2ssid [1-4]
[1-4]
Specify the SSID you want to configure.
Gateway(config-wlan2-ssid-
No.)# active
Enable the WiFi service set.
Gateway(config-wlan2-ssid-
No.)# [b|g|n|bg|gn|bgn]
[b|g|n|bg|gn|bgn] Select one of the following modes for your
wireless network.
Network Mode
Description
2.4 GHz (B)
In this mode, the Residential Gateway will
only support 802.11b standard.
2.4 GHz (G)
In this mode, the Residential Gateway will
only support 802.11g standard.
2.4 GHz (N)
In this mode, the Residential Gateway will
only support 802.11n standard.
2.4 GHz (B+G)
In this mode, the Residential Gateway will
support both 802.11b and 802.11g standards.
2.4 GHz (G+N)
In this mode, the Residential Gateway will
support both 802.11g and 802.11n standards.
2.4 GHz (B+G+N)
In this mode, the Residential Gateway will
support 802.11b, 802.11g and 802.11n
standards.
Gateway(config-wlan2-ssid-
No.)# broadcast
Have the SSID disclose in public.
Gateway(config-wlan2-ssid-
No.)# datarate [auto|1-44]
[auto|1-44]
Specify the number corresponding its data rate
respectively as below:
1:6m 2:9m 3:12m
4:18m
5:24m 6:36m 7:48m 8:54m
9:msc0 10:msc1
11:msc2
12:msc3
13:msc4 14:msc5 15:msc6 16:msc7
17:msc8 18:msc9 19:msc10
20:msc11
21:msc12 22:msc13 23:msc14 24:msc15
25:nss1-
msc0
26:nss1-
msc1
27:nss1-
msc2
28:nss1-
msc3
29:nss1-
30:nss1-
31:nss1-
32:nss1-
