138
Management Server Confirm Password
—
Specify the password of the Auto
Configuration Server again.
Periodic Change Notify
—
Enable or disable Periodic Information function. It defines the
time interval that a piece of information will be sent after a communication session is
done.
Note:
If a communication session has been incomplete for long time, the time interval will
start counting at the beginning of communication session.
Periodic Change Notify Interval
—
Specify the time in second after which a piece of
information will be sent again. The default value is 60.
Connect Request User Name
—
Specify the name of the Connection Request Server.
Connect Request User Password
—
Specify the name of the Connection Request
Server.
Connect Request Confirm Password
—
Specify the name of the Connection Request
Server again.
Click
Apply Basic Setup
to submit your settings after you finish configuring this page.
3.10.2 SNMP
The Residential Gateway supports SNMP management. SNMP stands for “Simple Network
Management Protocol”. A brief introduction for SNMP will be found in Chapter 4 of this document.
3.10.2.1 SNMP Management
Select
SNMP
from the
Management
sub menu bar. And then the following screen page appears.
