14
1. Restore a configuration file via FTP or TFTP server.
Command
Parameter
Description
Gateway# copy-cfg
from ftp [A.B.C.D]
[file name]
[user_name]
[password]
[A.B.C.D]
Enter the IP/IPv6 address of your FTP
server.
[file name]
Enter the configuration file name that you
want to restore.
[user_name]
Enter the username for FTP server login.
[password]
Enter the password for FTP server login.
Gateway# copy-cfg
from tftp [A.B.C.D]
[file_name]
[A.B.C.D]
Enter the IP/IPv6 address of your TFTP
server.
[file name]
Enter the configuration file name that you
want to restore.
Example
Gateway# copy-cfg from ftp 192.168.1.198 HS_0600_file.conf misadmin1 abcxyz
Gateway# copy-cfg from tftp 192.168.1.198 HS_0600_file.conf
Note:
For ISP, the default write protection level is set “home” in configuration file on the ground of
safety, which means the following functions are unable to be overwritten when executing configure
restoration.
1. DDNS
2. Network Setup (LAN-IP, DHCP Server, DHCP Reserved)
3. WiFi (Wireless Setup, Wireless Security)
4. Application (DMZ, Port Forwarding)
5. Security (Firewall, Packet Filter, URL Filter, VPN Pass-Through, UPnP, DDoS)
6. Administration (User Privilege) - Yet if the write protection level is “home”, the user privilege
level “superuser” and “editor” will be deleted except “homeuser”. However, the “homeuser” is
copied from either existing DUT or new configure file. It depends on the write protection level.
Auumed that we have a setting of existing User Previlidge in DUT and a configure file ready to be
loaded.
Here is the treatment of User Privilege of configure restoration:
A. Save the existing homeuser configuration in DUT
B. Reset the DUT back to default setting.
C. Check the write protection level. If the write protection level is “home”, it loads DUT’s homeuser
configure back into DUT.
To overwrite all of configuration, please change the write protection level “home” into “editor”.In
terms of User Previlidge. If the write protection level is “editor”, it loads the homeuser of new
homeuser configure file into DUT
Existing DUT User
Previlidge Accounts:
1. Superuser
2. Editor
3. Homeuser
New Configure file of User
Previlidge Accounts::
1. Superuser
2. Homeuser
Write Protection
Level “home”
Write Protection
Level “editor”
