117
Action
—
Click
Add URL Filter
to add a new rule to the table after you configure it in the
text boxes. Then, click
Check Icon
to submit the new settings. If you need to remove any
entry from this table, click
Cross Icon
.
Click
Apply URL Filter
to submit your settings after you finish configuring this page.
3.6.4 VPN Pass Through
This feature enables the VPN traffic to be transmitted from the private network of the Residential
Gateway to the public network. So the VPN client on the private network can establish a VPN
tunnel to the remote VPN server. Select
VPN pass through
from the
Security
sub menu bar.
Then,
VPN pass through
screen page appears as follows:
For details on the settings, please refer to the description of the individual section below.
VPN Pass Through
The Residential Gateway supports VPN pass through of the most popular
VPN tools
-
IPSec (IP Security), PPTP and L2TP. This section allows you to enable the VPN pass
through feature for any of these tools which the VPN client on the private network uses. Below is a
description of configuration parameters in this section.
IPSec Pass Through
—
Enable or disable IPSec pass through on the Residential
Gateway. IPSec stands for “Internet Protocol Security”. It is a suite of protocols for
secure exchange of packets at the IP layer.
PPTP Pass Through
—
Enable or disable PPTP pass through on the Residential
Gateway. PPTP stands for “Point-to-Point Tunneling Protocol”. And PPTP pass through
is a feature which allows the Point-to-Point Protocol to be tunneled through an IP
network.
