63
(Diagnostics, User privilege, Save&Logout),
etc.
Guest:
Read-Only
access privilege
Gateway(config-user-
NAME)# password
[password]
[password]
Enter the password, up to 20 alphanumeric
characters, for this user account.
No command
Gateway(config)#no user
name [username]
[username]
Delete the specified account.
Gateway(config-user-
NAME)# no active
Deactivate the selected user account.
Gateway(config-user-
NAME)# no description
Remove the configured description.
Gateway(config-user-
NAME)# no password
Remove the configured password value.
Gateway(config-user-
NAME)# no level
Reset access level privilege back to the
factory default (access denied).
Show command
Gateway(config)# show
user name
List all user accounts.
Gateway(config)# show
user name [user_name]
[user_name]
Show the specific account’s information.
Gateway(config-user-
NAME)# show
Show or verify the newly-created user
account’s information.
User command example
Gateway(config)#user name miseric
Create a new login account “miseric”.
Gateway(config-user-miseric)#
description misengineer
Add a description to this new account
“miseric”.
Gateway(config-user-miseric)# password
mis2256i
Set up a password for this new account
“miseric”
Gateway(config-user-miseric)# level rw
Set this user account’s privilege level to
“read and write”.
2.5.15 VLAN Command
Command
Parameter Description
Gateway(config)# vlan apply
Apply all WAN interface configuration and
all VLAN configuration.
Gateway(config)# vlan inside-
nat-vlan [1-4094]
[1-4094]
Specify the PVID of LAN port on the
private network. The default value is 9.
