CTI 2572-A Installation and Operation Guide V1.3
9
CHAPTER 2. INSTALLATION
The installation of the Model 2572-A Ethernet TCP/IP Adapter Module consists of the following
steps:
1)
Planning the installation,
2)
Unpacking and configuring the module,
3) Physical
installation,
4)
Setting IP information,
5) Connecting
cables,
6)
Checking the module operation.
2.1. Installation Planning
Choosing Ethernet Media
The 2572-A module attaches directly to 10BaseT or 100Base TX media (Shielded or Unshielded
Twisted Pair) via the RJ-45 connector. Ensure that the cables you use for Ethernet communications
meet the appropriate IEEE 802.3 specifications and are appropriate for the environment in which you
are operating. CTI recommends you use cables rated Category 5e or better.
The module can also participate in networks that use fiber optic cable. The most common use of fiber
optic cable is to connect to an Ethernet hub or switch which is installed in the local work area. Copper
cable (Unshielded Twisted Pair or Shielded Twisted Pair) is then run from the local hub or switch to
the module. Alternately, you can procure a fiber optic to twisted pair converter.
Selecting an IP Address and Other Network Parameters
Before proceeding, you must determine what IP address you will assign to the module, the subnet
mask to use, and the IP address of the default router. If you are connecting to an existing network or
to the Internet, your network administrator should provide this information. If you are installing a
stand-alone network, you should choose from within the set of “private” IP addresses specified in
RFC 1597 and set the subnet mask accordingly. See APPENDIX D. IP ADDRESS INFORMATION
for a description of the IP Address numbering conventions.
Choosing a Module Startup Method
Before the 2572-A will communicate using TCP/IP, the TCP/IP parameters must be set and the
module network server must be started. The 2572-A provides several alternative methods to
accomplish this task. The startup method is selected via the Option Switches and the Module ID
switches. See Section 2.4 for more information.
Summary of Contents for 2572-A
