CTE ZED 23.2 JH, Use And Maintenance Manual, Page: 4 / 56

Use and maintenance manual
ZED 23.2 JH
Code n°UM0260_GB
2
3.3.2 TIPPING DANGER .................................................................................... 19
3.3.3 FALLING HAZARD .................................................................................. 20
3.3.4 COLLISION HAZARD .............................................................................. 20
3.3.5 DANGERS RELATIVE TO THE WORK ENVIRONMENT ................... 20
3.3.6 DANGERS RELATIVE TO THE MACHINE ........................................... 21
3.4 Summary table of Standards for the operator ....................................................... 21
3.5 Operator position ................................................................................................. 22
3.6 Dangerous area ................................................................................................... 22
3.7 Residual risks ...................................................................................................... 22
3.8 Individual protection devices ................................................................................ 22
3.8.1 Harness system ............................................................................................ 22
3.8.2 Additional personal protection equipment .................................................. 23
4 OPERATIONAL INSTRUCTIONS
......................................................................................... 24
4.1 Foreword.............................................................................................................. 24
4.2 Transfer ............................................................................................................... 24
4.2.1 Controls and checks before transport on roads ........................................... 24
4.3 Using the elevated work platform ......................................................................... 25
4.3.1 Controls and checks before use ................................................................... 25
4.3.2 Stabilisation of the elevated work platform (EWP) .................................... 26
4.3.3 Starting the platform .................................................................................... 27
4.3.4 Putting the elevated work platform into rest conditions ............................. 29
4.3.5 Switching the vehicle off ............................................................................. 30
4.3.6 Parking ........................................................................................................ 30
4.3.7 Underrun anti-collision bar .................
Errore. Il segnalibro non è definito.
4.3.8 Work platform centre LED .................
Errore. Il segnalibro non è definito.
4.4 Emergency manoeuvres ...................................................................................... 31
4.4.1 Work platform emergency stop ................................................................... 31
4.4.2 Work platform levelling .............................................................................. 31
4.4.3 Recovering the basket from the ground if the operator faints ..................... 31
4.4.4 Recovering the work platform in the case of power failure ........................ 31
4.4.5 Manual platform recovery from the ground ................................................ 32
4.5 Transport ............................................................................................................. 33
4.5.1 Loading the machine onto the transport vehicle ......................................... 33
4.6 Storage ................................................................................................................ 33
4.6.1 Standstill for brief periods (less than 15 days) ............................................ 33
4.6.2 Standstill for long periods ........................................................................... 33
5 MAINTENANCE
........................................................................................................................ 34
5.1 Foreword.............................................................................................................. 34
5.2 General Standards ............................................................................................... 35
5.3 Maintenance summary table ................................................................................ 36
5.4 Spare parts .......................................................................................................... 36
5.5 Mechanics ............................................................................................................ 37
5.5.1 General mechanics ...................................................................................... 37
5.5.2 Endothermic engine ..................................................................................... 37
5.6 Hydraulic plant ..................................................................................................... 37
5.6.1 Hydraulic cylinders ..................................................................................... 37
5.6.2 Rotating joint ............................................................................................... 37
5.6.3 Hydraulic plant piping ................................................................................. 37
5.6.4 Control pressures and valves regulation ...................................................... 37
5.6.5 Hydraulic pumps and motors ...................................................................... 38
5.6.6 Hydraulic oil ................................................................................................ 38
5.6.7 Hydraulic oil filter ....................................................................................... 38