CTE ZED 23.2 JH, Use And Maintenance Manual, Page: 25 / 56

Use and maintenance manual
ZED 23.2 JH
Code n°UM0260_GB
23
The lanyard must be adjusted as short as possible so as to
hold the body inside the work platform.
This assembly should not be regarded as a fall arrester,
however, it prevents falls.
The hook point inside the work platform is not to be
considered an anchorage point for fall arrester systems, but it
is a restraint point as it was designed to hold back the person
inside the work platform.
The use of fall prevention systems foresees a mandatory training.
Please refer to the instructions for use provided by the manufacturer of the harness
system components for the check, use and adjustment of the system.
OBLIGATION:
Use only devices that are well kept and in good working order.
Moreover, the devices must be approved and bear the conformity CE-
mark. Please refer to the manual provided by the manufacturer for
further instructions for use.
DANGER:
It
is prohibited to use the anchorage point in the platform to link fall
arrester systems.
3.8.2 Additional personal protection equipment
In addition to the harness system, the use of the aerial work
platform foresees the use of a safety helmet for overhead works
with chinstrap (EN 397) and footwear for professional use (EN
346).
Other equipment may be required depending on the type of job or environment, such
as: gloves, goggles, earmuffs, etc. The requirement for and type of PPE must be
evaluated by the employer or by the site manager.