CTE ZED 23.2 JH, Use And Maintenance Manual, Page: 26 / 56

Use and maintenance manual
ZED 23.2 JH
Code n°UM0260_GB
24
4 OPERATIONAL INSTRUCTIONS
4.1 Foreword
ATTENTION:
read and understand the previous chapters before reading this
chapter.
The chapter regarding operational instructions supplies the instructions relative to
machine functioning. The operator must follow all instructions contained and comply
with the Safety Standards and the Legislation.
The machine can only be used by operators trained appropriately for the use of this
type of machine and authorised. If the machine must be used by more than one
operator at different times during the same work shift, then all operators shall have the
same training, follow these instructions and comply with safety laws and regulations.
This means that
every
operator must:
•
prevent dangerous situations
•
always carry out the pre-operational control
•
always carry out the functions tests before using the machine
•
check the work area
•
only use the machine for the functions it has been designed for.
OBLIGATION:
it is mandatory to comply with the national Standards in force, the
Safety Standards made by the employer and those relative to the work
place.
4.2 Transfer
This elevated work platform is set-up on a vehicle type-approved for circulation on
roads.
The drive making the transfer on roads must have a suitable driving license according
to legal provisions.
4.2.1 Controls and checks before transport on roads
•
Make sure that the vehicle equipment is in perfect working order (brakes, lights,
mirrors, tyres, etc.).
•
Check the fuel level, lubricant oil and cooling liquid.
•
Check that the work platform and the booms are completely closed.
•
Check that the outriggers are completely retracted.
•
Check that the power take-off is disconnected.
•
When moving the machine, always check that the speed is suitable for the local
conditions and any Standards, that the route selected is not too rough or too
uneven.
•
During circulation, pat attention to the clearance of the machine (consult the
technical data).