CTE ZED 23.2 JH, Use And Maintenance Manual, Page: 32 / 56

Use and maintenance manual
ZED 23.2 JH
Code n°UM0260_GB
30
4.3.5 Switching the vehicle off
•
Seat in the driver's position.
•
Check that the indicator light on the cabin control panel is off, indicating full
retraction of the stabilisers (
pos. 2 fig. 4.3.9
), the green "go" indicator light should be
on (
pos. 3 fig. 4.3.9
).
•
Set the hand accelerator at minimum speed (unless acceleration is automatic).
•
Disconnect the power take-off as follows:
−
press the clutch pedal
−
press the disconnection button or activate the lever positioned between the
seats (
fig. 4.3.8
) in the “DISCONNECT” position
−
release the clutch pedal
−
the red "power take-off" LED (
pos. 1 fig. 4.3.9
) switches-off and the acoustic
warning is deactivated.
•
Before starting, make sure the circulation documents and driving license are on
board and follow the Highway Code.
4.3.6 Parking
•
Park the machine in a suitable area or, however, away from traffic congested areas.
•
The ground should be level and firm.
•
If parking on a slope or incline, insert the parking brake and block the wheels with
wedges.
•
For gradual cooling of the engine, let it tick-over for a few minutes.
•
Switch the engine off.
•
Engage the parking brake.
•
Remove the key.
•
Block all door closures.
•
Check closure of the control board, protections and any tool boxes.
1
2 fig. 4.3.8 fig. 4.3.9
3