CTE ZED 23.2 JH, Use And Maintenance Manual, Page: 24 / 56

Use and maintenance manual
ZED 23.2 JH
Code n°UM0260_GB
22
3.5 Operator position
During use, the operator must only control the work platform using the control board
positioned on the same.
Only in the machine stabilising phase is the operator's position on the ground in front
of the control board on the ground itself.
3.6 Dangerous area
The circular area delimited by the completely extended horizontal boom rotation is
dangerous. It is prohibited to stay in this area.
Delimit this area with relevant barriers, site tapes, chains etc.
Use the relevant signs used on roadwork sites.
3.7 Residual risks
Mechanical risks:
•
danger of crushing the feet during outrigger manoeuvres
•
danger of crushing limbs due to contact with boom articulations during closure.
The risk areas are indicated with stickers.
3.8 Individual protection devices
3.8.1 Harness system
OBLIGATION:
All the people occupying the work platform must
wear an appropriate harness system linked to the dedicated
anchorage point.
The work platform is fitted with two restraining
points for the linkage of a harness system.
Each anchorage point is sized for a static stress of
3 kN.
All the people occupying the work
platform must wear an appropriate fall
protection system comprised of a full body
harness complying with Standard EN 361,
fitted with chest and/or back connection
and restraint or positioning adjustable
lanyard
(EN 354/EN358) and 2
connectors (EN 362) of shape and size
suitable for linkage to the lanyard ends.
Note: the pictures above are only indicative.
Punto di ancoraggio
sistema di trattenuta
Punto di ancoraggio
sistema di trattenuta