CTE ZED 23.2 JH, Use And Maintenance Manual, Page: 19 / 56

Use and maintenance manual
ZED 23.2 JH
Code n°UM0260_GB
17
10. Articulated boom lifting control lever - upwards the articulated boom lifts, downwards
the articulated boom lowers.
11. Jib lifting control lever - upwards the jib lifts, downwards the jib lowers.
12. Work platform centre yellow LED – switch-on indicates the correct centring of the work
platform. It must always be on when the work platform is centred. If the work platform is
not centred the LED switches off and an acoustic signal is activated.
ATTENTION:
In the event of an emergency, the portable push-button panel has to be
plugged into the appropriate socket near the ground control panel.
2.11.4 Control board in cab
fig. 2.11.4
1.
Outriggers lowered red LED - when on it
indicates that the outriggers are not completely
retracted
.
2.
Fuse 4 A – platform
.
3.
Hour meter
.
4. Stabilisers lowered red warning light – switched on
and with the buzzer sounding, it indicates that the
stabilisers have not fully retracted.
5. Green "go" indicator light - switched on, it indicates
that the stabilisers have retracted for road
circulation.
2.11.5 PTO control
The insertion control of the power take-off depends on the truck model.
On some vehicles the power take-off engagement is electrical. In these cases, there is
a button on the dashboard and a relative LED.
On other vehicles power take-off engagement takes place mechanically via the
manual control lever.
Manual control:
power take-off control lever- in vertical position upwards the power take-off
is inserted and positioned downwards the power take-off is disconnected.
ATTENTION:
press the clutch pedal before inserting or disconnecting the power take-off
Never travel with the power take-off inserted, the gear box and the
hydraulic pumps could be damaged.
2.11.6 Outrigger controls and manometer
fig. 2.11.5
1. Right rear outrigger control lever - by lowering the
lever the outrigger descends, raising it the
outrigger lifts.
2. Left rear outrigger control lever - by lowering the
lever the outrigger descends, raising it the
outrigger lifts.
3. Left front outrigger control lever - by lowering the
lever the outrigger descends, raising it the
outrigger lifts.
4. Right front outrigger control lever - by lowering the lever the outrigger descends,
raising it the outrigger lifts.
5. Spirit level.
6. Hydraulic pressures gauge – indicates the working pressure.
2
3 4 1 5
5
6
3
4
1
2