CTE ZED 23.2 JH, Use And Maintenance Manual, Page: 37 / 56

Use and maintenance manual
ZED 23.2 JH
Code n°UM0260_GB
35
5.2 General Standards
•
Always use extractors, wrenches and equipment for removal and re-assembly, in
order not to deteriorate the pieces.
•
To release tightly fixed parts, use copper hammers or wooden mallets.
•
Distinctly separate the pieces of the various groups and partially re-activate the
nuts on their pins or studs. Clean the pieces using brushes or cloths and then
wash with oil or hot water, removing residues with compressed air.
•
After grinding with abrasive bodies, wash the parts thoroughly or subject them to a
jet of compressed air, making sure that all abrasive dust has been removed.
•
Make sure that the pieces are clean on re-mounting and lubricate appropriately.
•
Pay maximum attention to the Seeger ring and the circlips: if they are broken,
replace immediately.
ATTENTION:
the maintenance described in the following pages is exclusively for
the overhead work platform.
Follow that prescribed by the manufacturer for maintenance of the
truck on which the machine is set-up.