CTE ZED 23.2 JH, Use And Maintenance Manual, Page: 22 / 56

Use and maintenance manual
ZED 23.2 JH
Code n°UM0260_GB
20
•
It is prohibited to modify, remove or replace any machine component that would
reduce overall weight or the stability of the machine base, such as ballasts,
emptying tyres, batteries, spare wheels, etc.
•
It is prohibited to position or fix projecting loads on any part of the machine. It is
prohibited to apply overhanging loads to the platform and to use the machine to lift
suspended loads. The machine must not be used as a crane.
•
It is prohibited to use the machine to lift loads in the platform or to use the machine
as a hoist.
•
It is prohibited to use the machine to transfer persons from one surface to another
and it is prohibited to use as a lift.
•
It is prohibited to use the platform controls to free the platform if it is blocked or in
any way hindered by a nearby structure, which prevents normal movement.
Request assistance from specialised staff.
•
It is prohibited to tip the vehicle cab, stability would be reduced.
•
It is prohibited to enter the vehicle cab, stability would be reduced.
3.3.3 FALLING HAZARD
•
It is mandatory to wear suitable fall-prevention devices in compliance with the
Standards in force. The safety anchor rope must be fixed to the special connection
present on the working platform.
•
It is prohibited to fasten operators working outside the platform at a height to the
platform’s safety rope connection.
•
It is prohibited to sir on or climb onto the work platform guard rail.
•
It is prohibited to use ladders, scaffolding or planks in the platform in order to gain
extra height.
•
It is prohibited to rest ladders against the structure of the machine
•
It is prohibited to descend from the work platform when it is at a height. It is
prohibited to descend along the arm.
•
It is mandatory to keep the work platform deck free from waste.
•
It is mandatory to check that the work platform access gate is closed before use of
the same. It is prohibited to block the access gate in an open position.
3.3.4 COLLISION HAZARD
•
Always check the work area to ascertain that there are no obstacles overhead or
other potential dangers.
•
During boom movement, constantly check the area in a way not to strike objects
with the boom or work platform.
•
Pay the utmost care when gripping the platform’s handrail to avoid being crushed.
•
It is advised that the operators wear a type-approved helmet during operations
with the machine.
•
Do not lower the boom id the area below is not free from staff or obstructions.
3.3.5 DANGERS RELATIVE TO THE WORK ENVIRONMENT
•
Do not use the machine in environmental temperatures lower than -10°C or
exceeding 40°C. To operate in different environmental temperatures, contact the
manufacturer.
•
Always use the machine in well ventilated places in order to prevent the risk of
carbon monoxide poisoning.