58
CHAPTER 3
INTRODUCTION TO CLI
Syntax:
(config)# enable password [level <priv: 1-15>] <password>
Explanation:
Configure enable password and privilege level.
Parameters:
[level <priv: 1-15>]: Specify the privilege level for this password.
<password>: Specify a password for Enable mode.
Negation:
(config)# no enable password [ level <priv> ]
3.9.10.3 (config)# enable secret
Syntax:
(config)# enable secret { 0 | 5 } [ level <priv: 1-15> ] <password>
Parameters:
{ 0 | 5 }: Specify “0” to denote unencrypted secret (cleartext). Specify “5” to denote encrypted secret (MD5).
[level <priv: 1-15>]: Specify the privilege level for this password.
<password>: Specify the enable mode password.
Explanation:
Configure enable secret password and privilege level.
Negation:
(config)# no enable secret { [ 0 | 5 ] } [ level <priv> ]
3.9.11 (config)# eps
3.9.11.1 (config)# eps <inst> 1plus1 { bidirectional | { unidirectional [ aps ] } }
Syntax:
(config)# eps <inst> 1plus1 { bidirectional | { unidirectional [ aps ] } }
Explanation:
Configure the EPS 1 plus 1 architecture's direction.
Parameters:
<inst>: Specify the instance number.
{ bidirectional | { unidirectional [ aps ] } }: Specify the direction for the protection type.
Negation:
(config)# no eps <inst>
Show: #
show eps [ <inst> ] [ detail ]
3.9.11.2 (config)# eps <inst> command
Syntax:
(config)# eps <inst> command { lockout | forced | manualp | manualw | exercise | freeze | lockoutlocal }
Explanation:
Perform a particular action on an EPS instance
Summary of Contents for MSW-4424C Series
Page 1: ...1 MSW 4424C MSW 4424CS L2 Gigabit Carrier Ethernet Switch ...
Page 382: ......
