Chapter 4. Web Configuration & Operation
279
CHAPTER 4
WEB OPERATION & CONFIGURATION
cPeriod:
Fault Cause indicating that a CCM is received with a period different what is configured for this MEP - from
this peer MEP.
cPriority:
Fault Cause indicating that a CCM is received with a priority different what is configured for this MEP - from
this peer MEP.
Functional Configuration
Continuity Check
Enable:
Select the checkbox to enable Continuity Check that CCM PDU is transmitted and received. The CCM PDU
is always transmitted as Multicast Class 1.
Priority:
The priority to be inserted as PCP bits in TAG (if any).
Frame rate:
Select the transmitting frame rate of CCM PDU.
APS Protocol
Enable:
Select the checkbox to enable APS (Automatic Protection Switching) protocol.
Priority:
The priority to be inserted as PCP bits in TAG (if any).
Cast:
Select whether APS PDU transmitted unicast or multicast. The unicast MAC will be taken from the “Unicast
Peer MAC” configuration. Unicast is only valid for L-APS type. The R-APS PDU is always transmistted with
multicast MAC described in G.8032.
Type:
R-APS:
APS PDU is transmitted as R-APS (this is for ERPS).
L-APS:
APS PDU is transmitted as L-APS (this is for ELPS).
Last Octet:
This is the last octet of the transmitted and expected RAPS multi-cast MAC. In G.8031 (03/2010)
a RAPS multi-cast MAC is defined as 01-19-A7-00-00-XX. In current standard the value for this last octet is
'01' and the usage of other values is for further study.
Click the “Fault Management” button.
Summary of Contents for MSW-4424C Series
Page 1: ...1 MSW 4424C MSW 4424CS L2 Gigabit Carrier Ethernet Switch ...
Page 382: ......
