129
CHAPTER 3
INTRODUCTION TO CLI
[ flr <flr: unit> ]: The Frame Loss Ratio interval value.
Negation:
(config)# no mep <inst> lm
Show:
# show mep [ <inst> ] [ peer | cc | lm | dm | lt | lb | tst | aps | client | ais | lck ] [ detail ]
Clear:
# clear mep <inst> { lm | dm |tst }
3.9.32.16 (config)# mep <inst> lt
Syntax:
(config)# mep <inst> lt <prio> { { mep-id <mepid> } | { mac <mac> } } ttl <ttl>
Explanation:
Configure link trace of a MEP.
Parameters:
<inst>: Specify an instance ID number.
lt <prio: 0-7>: Configure link trace priority in case of tagged OAM. In the EVC domain this is the COS-ID.
{ { mep-id <mepid> } | { mac <mac> } }: Specify Peer MEP-ID for Link Trace target unicast MAC or Link Trace
target unicast MAC address.
ttl <ttl> Time to live value.
Negation:
(config)# no mep <inst> lt
Show:
# show mep [ <inst> ] [ peer | cc | lm | dm | lt | lb | tst | aps | client | ais | lck ] [ detail ]
3.9.32.17 (config)# mep <inst> meg-id
Syntax:
(config)# mep <inst> meg-id <megid> { itu | itu-cc | { ieee [ name <name> ] } }
Explanation:
To configure MEG-ID format.
Parameters:
<inst>: Specify an instance ID number.
meg-id <megid>: Specify a MEG ID string. This is either the ITU MEG-ID or the IEEE Short MA, depending on the
selected MEG-ID format. The ITU max. is 13 characters. The ITU-CC max. is 15 characters. The IEEE max. is 16
characters..
{ itu | itu-cc | { ieee [ name <name> ] } }: Specify a MEG-ID format.
itu:
The MEG-ID has ITU format (ICC - UMC). The meg-id max. is 13 characters.
itu-cc:
The MEG-ID has ITU Country Code format (CC - ICC - UMC). The meg-id max. is 15 characters.
ieee:
The MEG-ID (Short MA Name) has IEEE Character String format. The meg-id max. is 16 characters.
name <name>:
This is only relevant for IEEE.
Summary of Contents for MSW-4424C Series
Page 1: ...1 MSW 4424C MSW 4424CS L2 Gigabit Carrier Ethernet Switch ...
Page 382: ......
