64
CHAPTER 3
INTRODUCTION TO CLI
3.9.12.9 (config)# erps <group> version { 1 | 2 }
Syntax:
(config)# erps <group> version { 1 | 2 }
Explanation:
Configure ERPS version for a specific profile.
Parameters:
<group: 1-64>: Specify a group number. The allowed range is from 1 to 64.
{ 1 | 2 }: Specify ERPS version 1 or 2.
Negation:
(config)# no erps <group> version
Show: #
show erps [ <groups> ] [ detail | statistics ]
3.9.12.10 (config)# erps <group> vlan { none | [ add | remove ] <vlans> }
Syntax:
(config)# erps <group> vlan { none | [ add | remove ] <vlans> }
Explanation:
Configure VLANs for a specific ERPS profile.
Parameters:
<group: 1-64>: Specify a group number. The allowed range is from 1 to 64.
{ none | [ add | remove ] <vlans> } : Specify an option.
none:
Do not include any VLANs.
[ add | remove ] <vlans>:
Add or remove a specific VLAN.
Negation:
(config)# no erps <group> vlan
Show: #
show erps [ <groups> ] [ detail | statistics ]
3.9.13 (config)# evc
3.9.13.1 (config)# evc [ update ] <evc_id>
Syntax:
(config)# evc [ update ] <evc_id> { [ vid <evc_vid> ] } [ ivid <ivid> ] [ interface ( <port_type> [ <port_list> ] ) ]
[ learning [ disable ] ] [ policer { <policer_id> | none | discard } ] [ inner-tag add { [ type { none | c-tag | s-tag | s-
custom-tag } ] [ vid-mode { normal | tunnel } ] [ vid <it_add_vid> ] [ preserve [ disable ] ] [ pcp <it_add_pcp> ] [ dei
<it_add_dei> ] }*1 ] [ outer-tag add vid <ot_add_vid> ]
Explanation:
Create a new EVC entry.
Parameters:
[ update ]: Update this EVC entry.
<evc_id>: Specify the EVC ID. The allowed range is from 1 through 4096.
Summary of Contents for MSW-4424C Series
Page 1: ...1 MSW 4424C MSW 4424CS L2 Gigabit Carrier Ethernet Switch ...
Page 382: ......
