Chapter 4. Web Configuration & Operation
242
CHAPTER 4
WEB OPERATION & CONFIGURATION
Mode:
Enable or disable IP source guard on a port. Please note that to make IP source guard work, both global mode
and port mode must be enabled.
Max Dynamic Clients:
Select the maximum number of dynamic clients that can be learned on a port. The available
options are 0, 1, 2, unlimited. If the port mode is enabled and the maximum number of dynamic clients is equal 0, the
switch will only forward IP packets that are matched in static entries for a given port.
4.3.4.2.4.2 Static Table
Port:
Select a port to which a static entry is bound.
VLAN ID:
Enter VLAN ID that has been configured.
IP Address:
Enter a valid IP address.
IP Mask:
Enter the subnet mask for the entered IP address.
Click the “Add New Entry” button to insert an entry to the table.
Select the “Delete” checkbox to remove the entry during the next save.
Click the “Save” button to save settings or changes.
Click the “Reset” button to restore settings to default settings or previously configured settings.
Summary of Contents for MSW-4424C Series
Page 1: ...1 MSW 4424C MSW 4424CS L2 Gigabit Carrier Ethernet Switch ...
Page 382: ......
