Chapter 4. Web Configuration & Operation
362
CHAPTER 4
WEB OPERATION & CONFIGURATION
Topology Change Last:
The time since this spanning tree was last configured.
CIST Ports & Aggregations State
Port:
Display the port number.
Port ID:
The port identifier used by the RSTP protocol. This port ID contains the priority and the port number.
Role:
The role assigned by Spanning Tree Algorithm. Roles can be “Designated Port”, “Backup Port”, “Root Port”.
State:
Display the current state of a port.
Blocking:
Ports only receive BPDU messages but do not forward them.
Learning:
Port has transmitted configuration messages for an interval set by the Forward Delay parameter
without receiving contradictory information. Port address table is cleared, and the port begins learning addresses
Forwarding:
Ports forward packets and continue to learn addresses.
Edge:
Display whether this port is an edge port or not.
Point-to-Point:
Display whether this point is in point-to-point connection or not. This can be both automatically and
manually configured.
Uptime:
The time since the bridge port was last initialized.
4.4.8.2 Port Status
Port:
The port number.
CIST Role:
The role assigned by Spanning Tree Algorithm. Roles can be “Designated Port”, “Backup Port”, “Root Port”
or “Non-STP”.
Summary of Contents for MSW-4424C Series
Page 1: ...1 MSW 4424C MSW 4424CS L2 Gigabit Carrier Ethernet Switch ...
Page 382: ......
