110
CHAPTER 3
INTRODUCTION TO CLI
<val>: Specify a value between 5 and 32768 (seconds).
Example:
Set the LLDP timer value to 35.
Negation:
(config)# no lldp timer
3.9.26.4 (config)# lldp transmission-delay
Syntax:
(config)# lldp transmission-delay <val>
Parameters:
<val>: Specify a value between 1 and 8192 (seconds).
Explanation:
Configure a delay between the LLDP frames that contain changed configurations. Tx Delay cannot be
larger than 1/4 of the Tx interval value.
Example:
Set the LLDP transmission delay value to 2.
Negation:
(config)# no lldp transmission-delay
3.9.26.5 (config)# lldp med datum
Syntax:
(config)# lldp med datum { wgs84 | nad83-navd88 | nad83-mllw }
Explanation:
The Map Datum is used for the coordinates given in above options.
Parameters:
{ wgs84 | nad83-navd88 | nad83-mllw }: Specify one of the options.
WGS84: (Geographical 3D) - World Geodesic System 1984, CRS Code 4327, Prime Meridian Name:
Greenwich.
NAD83/NAVD88: North American Datum 1983, CRS Code 4269, Prime Meridian Name: Greenwich; The
associated vertical datum is the North American Vertical Datum of 1988 (NAVD88). This datum pair is to be
used when referencing locations on land, not near tidal water (which would use Datum = NAD83/MLLW).
NAD83/MLLW: North American Datum 1983, CRS Code 4269, Prime Meridian Name: Greenwich; The
associated vertical datum is Mean Lower Low Water (MLLW). This datum pair is to be used when
referencing locations on water/sea/ocean.
Example:
Set the map datum to wgs84.
# config t
(config)# lldp transmission-delay 2
# config t
(config)# lldp timer 35
Summary of Contents for MSW-4424C Series
Page 1: ...1 MSW 4424C MSW 4424CS L2 Gigabit Carrier Ethernet Switch ...
Page 382: ......
