Chapter 4. Web Configuration & Operation
237
CHAPTER 4
WEB OPERATION & CONFIGURATION
4.3.4.2.3.3 Access Control List
Access Control List is to establish filtering rules for an ACL policy, for a particular port or for all ports. Rules applied to a
port take effect immediately.
Ingress Port:
The ingress port of the access control entry. Select “All” to apply to all ports or select a particular port.
Policy Bitmask:
The policy number and bitmask of the ACE.
Frame Type:
The type of frame that matches to this rule.
Action:
Display the action type, either to permit or deny.
Rate Limiter:
Display rate limiter is enabled or disabled when matched frames are found.
Port Redirect:
Display port redirect is enabled or disabled.
Mirror:
Display mirror function is enabled or disabled.
Counter:
Display the number of frames that have matched any of the rules defined for this ACL.
Click the plus sign to add a new ACE entry.
ACE Configuration
Ingress Port:
Select the ingress port of the access control entry. Select “All” to apply an ACL rule to all ports or select a
particular port.
Policy Filter:
Select the policy filter type. “Any” means no policy filter is assigned to this rule (or don’t care). Select
“Specific” to filter specific policy with this ACE.
Frame Type:
Select a frame type to match. Available frame types include Any, Ethernet, ARP, IPv4. By default, any
frame type is used.
Summary of Contents for MSW-4424C Series
Page 1: ...1 MSW 4424C MSW 4424CS L2 Gigabit Carrier Ethernet Switch ...
Page 382: ......
