194
CHAPTER 3
INTRODUCTION TO CLI
3.9.49 (config)# upnp
3.9.49.1 (config)# upnp
Syntax:
(config)# upnp
Explanation:
Enable upnp operation.
Example:
Enable upnp operation
Negation:
(config)# no upnp
Show:
# show upnp
3.9.49.2 (config)# upnp advertising-duration
Syntax:
(config)# upnp advertising-duration <v_100_to_86400>
Parameters:
<v_100_to_86400>: Specify the advertising duration. The allowed range is 100 to 86400 (seconds).
Explanation:
This defines how often an UPnP advertisement is sent. The duration is carried in Simple Service Discover
Protocol (SSDP) packets which informs a control point how often it should receive a SSDP advertisement message
from the switch. By default, the advertising duration is set to 100 seconds. However, due to the unreliable nature of
UDP, it is recommended to set to the shorter duration since the shorter the duration, the fresher is UPnP status.
Example:
Set the upnp advertising duration to 150 seconds.
Negation:
(config)# no upnp advertising-duration
Show:
# show upnp
3.9.49.3 (config)# upnp ttl
Syntax:
(config)# upnp ttl <v_1_to_255>
Parameters:
<v_1_to_255>: Specify the ttl (time to live) value. The allowed range is 1 to 255.
Explanation:
TTL (Time to live) is used to configure how many steps an UPnP advertisement can travel before it
disappears.
# config t
(config)# upnp advertising-duration 150
# config t
(config)# upnp
(config)#
Summary of Contents for MSW-4424C Series
Page 1: ...1 MSW 4424C MSW 4424CS L2 Gigabit Carrier Ethernet Switch ...
Page 382: ......
