Chapter 4. Web Configuration & Operation
244
CHAPTER 4
WEB OPERATION & CONFIGURATION
4.3.4.2.5.2 VLAN Configuration
VLAN ID:
Specify ARP Inspection is enabled on which VLANs. First, you have to enable the port setting on Port mode
configuration web page. Only when both Global Mode and Port Mode on a given port are enabled, ARP Inspection is
enabled on this given port. Second, you can specify which VLAN will be inspected on VLAN mode configuration web
page. The log type also can be configured on per VLAN setting.
Log Type:
There are four log types available.
None:
Log nothing.
Deny:
Log denied entries.
Permit:
Log permitted entries.
All:
Log all entries.
Click the “Add New Entry” button to insert an entry to the table.
Select the “Delete” checkbox to remove the entry during the next save.
Click the “Save” button to save newly-configured settings or changes.
Click the “Reset” button to restore settings to default settings or previously configured settings.
4.3.4.2.5.3 Static Table
Port:
Select a port to which a static entry is bound.
VLAN ID:
Specify a configured VLAN ID.
MAC Address:
Specify an allowed source MAC address in ARP request packets.
IP Address:
Specify an allowed source IP address in ARP request packets.
Click the “Add New Entry” button to insert an entry to the table.
Select the “Delete” checkbox to remove the entry during the next save.
Summary of Contents for MSW-4424C Series
Page 1: ...1 MSW 4424C MSW 4424CS L2 Gigabit Carrier Ethernet Switch ...
Page 382: ......
