Hi-flying HF-LPB User Manual Download

Page: 1 / 59

HF-LPB Low Power WiFi Module User Manual

Shanghai High-Flying Electronics Technology Co., Ltd

www.hi-flying.com

- 1 -

HF-LPB

Low Power WiFi Module User Maunal

V 1.1

may be reproduced or distributed in any form or by any means, or stored

in a database or retrieval system, without the prior written permission of

the publisher. Hi-flying Incorporated reserves the right to make changes in

technical and product specifications without provisional notification. This

module is limited to OEM installation only and must not be sold to end-

users. OEM integrators must be instructed to ensure that the end-user has

no manual instructions to remove or install the device. The end-user can

not remove or install this module to any other devices.

Changes or modifications not expressly approved by the manufacturer

could void the user’s authority to operate the equipment.

If the FCC ID of the module cannot be seen when it is installed, then the

host label must include the text: Contains FCC ID: AZY-HF-LPB

Summary of Contents for HF-LPB




























































Search results

Summary of Contents for HF-LPB

Reviews:

Related manuals for HF-LPB

Brands by name

Popular brands

Hi-flying HF-LPB, User Manual

Search results

Summary of Contents for HF-LPB

Reviews:

Related manuals for HF-LPB

Brands by name

Popular brands