Cranesmart Systems LMI System, User Manual

Page: 52 / 101

51 Cranesmart LMI Version R9
Shut-off Bypass Plug
The bypass plug is only required with systems that are using shut-off functions and only if those solenoids are
“Normally Hot” (energized), supplying power while in the normal operational modes (not alarming).
If you have installed the system using the white output wire to control your crane shut-offs/kick outs and the
Cranesm
art™ system is overcome by user damage or system malfunction this wire can be by-passed using a bypass
plug included with the kit. When this plug is installed as follows, it will allow your function kick outs to be re-energised.
1. Remove the power cable from the back of the display panel by twisting the coupling ½ turn clockwise and pull away from the panel.
2. Insert the plug (Bypass plug) into the end of the power cable (lower illustration)
– not the panel – and turn the plug ½ turn clockwise.
NOTE:

This will restore crane functions however the
Cranesmart™ System is no longer monitoring crane functions.