background image

TIE DOWN ENGINEERING • Atlanta, GA 30336

www.tiedown.com  (404) 344-0000 

www.tranzsporter.com

TP400

Carriage

Assembly

Manual

Instruction Sheet #08237

E1398; 070617

Congratulations

You’ve purchased a roofing hoist manufactured by TIE DOWN ENGINEERING. All of hoist products
are easy to assembly and is solidly built in USA and tested to ensure years of service.

Before You Begin

We’ve included this easy to use instruction sheet to ensure quick, easy assembly of your carriage
platform. Be sure to read the instructions (a time saver in the long run). Identify all parts and hardware.

Questions?

We’re here to help, just call 800-241-1806. For faster service, have your model and serial number
ready when calling.

Page 1 of 4

Read this manual before using this product.

Failure to follow the instructions and safety precautions in this

manual can result in serious injury or death.

Keep this manual in a safe location for future reference.

Summary of Contents for TP250

Page 1: ...e You Begin We ve included this easy to use instruction sheet to ensure quick easy assembly of your carriage platform Be sure to read the instructions a time saver in the long run Identify all parts and hardware Questions We re here to help just call 800 241 1806 For faster service have your model and serial number ready when calling Page 1 of 4 Read this manual before using this product Failure t...

Page 2: ...tform Base 1 Carriage Base 1 Support Struts w Pins 2 Plywood Brackets w Pins 2 5 16 18 x 2 Bolt 2 5 16 18 x 1 Bolt 2 5 16 Nyloc Nuts 4 Step 1 Place the Carriage Base wheels down and Platform Base Smooth flat top down on a hard flat surface Lift carriage base on one end shown left so the pivot tab holes align with each other Step 2 Insert 5 16 x 2 Bolt through platform and carriage base tab holes T...

Page 3: ... x 1 bolt through back flap tap holes and carriage base Tighten nylock nut with the bolt Do not over tighten nyloc nut so tight as to prevent free movement Repeat for the other side Step 4 Fold the platform back flap down lift the carriage base up 90 degrees to both back flap and platform base Position support strut with tab over the carriage base tab as shown Insert safety pin Insert safety pin b...

Page 4: ... further instructions Located in the tubular holder on the rear side of the motor tray Plywood Brackets Safety Pins Plywood brackets used when handling panel goods Plywood brackets in position for transport or storage Step 5 Flip the completed base over Insert the plywood brackets into slots on the front of the Platform base If you plan to use the plywood brackets insert the short end into the slo...

Reviews: