Cranesmart Systems LMI System, User Manual

Page: 75 / 101

74 Cranesmart LMI Version R9
Config Lock
Config Lock enables the supervisor
to stop operators from changing the crane‟s configuration. The Config Lock affects
both the Setup Menu Configuration and the Start-up Set-up menu screens.
1. From the Top Menu screen, use the Up or Down arrows and select Options.
2. Use the Up or Down arrows, select Config.
3. Use the Up or Down arrows, select Locked/Unlock.
4. Press Accept twice to save.
5. Use the Up or Down arrows to select Top Menu to continue with Supervisor permission or, Select Exit to return to Primary Operating Screen
and Operator Permission level.
6. When the operator selects Change from this screen and the Config Lock is on the operator will only be able to change two settings, Winch
and POL.
7. When the Operator selects Continue the sequence of screens is the same as at Start up or after using the Quick Winch Switch.
NOTE:

If there is a problem with the configuration a supervisor will be required to make the change.