Cranesmart Systems LMI System, User Manual

Page: 28 / 101

27 Cranesmart LMI Version R9
Wind Speed Transducer Installation
The wind speed transducer is designed to swivel so that it is always in an upright vertical position, regardless of the
boom angle.
Tools required

5/16” hex key (included)

3/16” hex key (included)

Welder
Wind Speed Installation Procedure
1. Remove the shoulder bolt from the weld bar and swivel mount plate.
2. Tack weld the weld bar to the crane. The weld bar can be welded directly to the crane or to an existing
Cranesmart™ weld plate. (Both sides of the
weld bar are identical).
3.
Attach the wind speed swivel mount plate to the weld bar using the shoulder bolt and washer. Use a 5/16” hex key to tighten the bolt.
4. Attach the wind speed transducer
to the swivel mount plate using the provided hex key bolts and lock washers. Use a 3/16” hex key to tighten all
bolts.
5. Ensure that there is enough clearance for the wind speed transducer to swing freely. Finish welding the weld bar to the crane.