Cranesmart Systems LMI System, User Manual

Page: 49 / 101

48 Cranesmart LMI Version R9
Outside Operator Cab OR no Cab on Crane
When the display panel is mounted outside of the cab or there is no cab on the crane use the panel mount antenna.
This antenna is normally installed at the factory, if it is not installed, do the following:
1. Clean the top of the panel with the alcohol pad included in the installation kit.
2. Peel off the paper from the adhesive strip on the underside of the antenna.
3. Place the antenna on the top of the panel.
4. Using the P-clamp and machine screw included in the installation kit, strain relief the cable as shown below.
5. Attach the antenna connector to the panel and secure.
6. Determine the best position for the antenna; check the signal quality while moving it around.
7.
Check the quality of the signal using the “SIG” option in the Secondary Operating screen (see page 83). (This menu displays for eight
seconds). For a permanent display use the signal viewer in the Diagnostics menu.