Cranesmart Systems LMI System, User Manual

Page: 78 / 101

77 Cranesmart LMI Version R9
Permissions
Allows user to enter the Supervisor Mode (see page 68)
1. From the Top Menu screen, use the Up or Down arrows, select System.
2. Use the Up or Down arrows, select Permission.
3. Press Select on Permission.
4. Use the Up or Down arrows, set the Permission Access Code.
5. Press Accept twice to save.
6. Select Top Menu to continue with Supervisor permission, Back to return to System Menu, or Select Exit to return to Primary Operating
Screen and Operator Permission level.
Restricted
Users must call the service department to gain access to the restricted menu.
Clock
1. From the Top Menu screen, use the Up or Down arrows and select System.
2. Use the Up or Down arrows, select Clock.
3. Use the Up or Down arrows, select Hours, Minutes, Months, Day or Year.
4. Use the Up or Down arrows, set Time, and Date.
5. Press Accept twice to save.
6. Use the Up or Down arrows to select Top Menu to continue with Supervisor permission, Back to return to System Menu, or select Exit to
return to Primary Operating Screen and Operator Permission level.
Checksum Repair
If your display shows that you have a “Checksum Error” you can use this function to repair the problem.
1. From the Top Menu screen, use the Up or Down arrows and select System.
2. Use the Up or Down arrows, select CHKSM Repair.
3. Use the U
p or Down arrows, select Repair/Cancel. If repair is chosen the screen will display “Repairing Checksum Error”. After Checksum
has been repaired, you will automatically be sent back to the System Menu.
4. Use the Up or Down arrows to select Top Menu to continue with Supervisor permission, Back to return to the Top Menu, or select Exit to
return to Primary Operating Screen and Operator Permission level.