Cranesmart Systems LMI System, User Manual

Page: 81 / 101

80 Cranesmart LMI Version R9
Display Panel
– Operating Screens
Primary Operating Screen
The Primary Operating screen enables users to view the current displayed values, the screen changes depending on
the configuration of the system purchased. Display for Load and Angle Transducer shown below.
Winch Displays the actual load on the hook in pounds. (Main, Aux 1, Aux 2)
Percentage Bar Graph Displays the percentage of the pre-set maximum load defined by the Load Chart.
The Bar Graph displays the amount of the load. If there is no load the graph is blank.
Max Load Displays the maximum load as defined by the Load Chart.
Radius Displays the current radius.
Angle Displays the angle of the boom in degrees using the horizontal line as zero.
Tare
A “T” is displayed at the end of the bar graph to indicate the tare out function.
Secondary Operating Screen
The Secondary Operating screen enables users to view more detailed information about their system and perform
operator functions.