Cranesmart Systems LMI System, User Manual

Page: 80 / 101

79 Cranesmart LMI Version R9
PIN Codes
This menu is used to store up to 18 unique user PIN numbers.
1. From the Top Menu screen, use the Up or Down arrows to select Logger.
2. Used the Up or Down arrows to select PIN Codes.
3. Default to PIN1, press Select then use the Up or Down arrows to choose a PIN number. The numbers can be between 0001 and 9999.
4. Repeat for each PIN number. Select MORE to get to the second page of PIN numbers.
5. Remember your PIN number!
6. Select Top Menu to continue with Supervisor permission, Back to return to the Logger Menu, or Select Exit to return to Primary Operating
Screen and Operator Permission level.
NOTE:

When inputting your PIN Code on power up, the default starting value is 5000.
PIN Login
This option is used to turn on or off the PIN Login requirement when the panel is powered up. If it is enabled the user
must enter a PIN before the panel will operate.
1. From the Top Menu screen, use the Up or Down arrows to select Logger.
2. Use the Up or Down arrows to select PIN login.
3. Use the Up or Down arrows to select enable/disable.
4. Press Accept twice to save.
5. Select Top Menu to continue with Supervisor permission, or Select Exit to return to Primary Operating Screen and Operator Permission
level.
NOTE:

If you have forgotten your PIN Code or have not set any codes but have enabled the Login, please phone our Service Department at (888) 562-3222
or (780) 437-2986.